Ht Lead Connector Types

I Suspect That These Manufacturers Are Following The Lead Of Commercial Radio Manufacturers (E.g., Motorola) Who Also Use The Male Connector.

Ht lead terminal for pvl & lucas coils. Theres is a special tool for this, but it can be done with pliers with a little care. The technology used in ngk ignition leads meets the oe standards of car manufacturers.

Carbon Cable Has Resistance Marked On The Insulating Sheath.

500 ohm/m compared to 5000 ohm/m for common carbon core type performance ignition leads or up to 20k ohm/m for standard leads. See 999 054 high tension spark plug lead. In stock (can be backordered) add to basket.

Ignition System, Ht Caps, Connectors & Leads, Ht Coils For Classic Bikes, British Bike Distributor Parts Tag:

There are three different types of ignition leads, copper core, resistive and reactive which differ based on the materials used for the conductor and the type of resistor required for interference suppression. At the green spark plug company, we have a vast range of ht lead. The conductor used in a high tension line is rabbit 6/1/3.35 mm here also a number of aluminum strands are 6, a number of steel strands are 1 and the diameter of each strand is 3.35 mm.

There Is Also Top Quality Silicon Ht Cable Sold By The Metre.

This is the brass connector for the end of the ht lead where it plugs into the ignition coil. This type is soldered to the ht lead conductor. £0.36 (inc vat) out of stock.

In Older Cars The Ht Ignition Leads Took The High Voltage From The Coil To The Spark Plug, This Was Very High Voltage So Could Cause Interference On The Car Radio, Electrics.

An alternative is to cut a small v through the insulation with a sharp knife. The brush and spring need to be removed to gain access to the screw. The pin type require a crimped connector on the end of the cable.